Standard
Fort
|
|
|
CARACTÉRISTIQUES: Use when connecting two tooling plates on a large machine table, to hold locational tolerances between all grid holes. Two Locating Gauges are required, mounted at opposite sides.
TAILLES: Available for Standard (1/2"), and Heavy (5/8") modular systems — see Dimensions page for part numbers.
MONTAGE: Fasten each Locating Gauge with four Locating Screws (order separately), two in each plate. Remove gauges after fastening plates to the machine.
MATÉRIAU: 1045 steel, black oxide finish. |
|
