Fasten valve to fixture using the two tapped mounting holes on the side. Mount in any position, horizontal or vertical.
Clamping valve has four 1/4" BSPP ports:
P = Pressure into valve from power source
R = Return from valve to power source
A = Flow from valve to clamps, clamping
B = Flow from valve to clamps, unclamping
Port connections and flow directions must be exactly as shown on the drawings; otherwise the valve will not function correctly. Use only with clean, approved hydraulic fluid (CLR-2-FL or equivalent). Fluid must be kept clean (10 micron or better nominal filtration). Do not use NPT fittings.