Carr Lane Manufacturing is proud to return to Mexico to participate in the 2021 TECMA trade show. We invite our customers to meet with us in person, to see our products up close, and to learn more about how Carr Lane Manufacturing remains a world leader in the manufacturing industry. Try our new products, ask questions, and let us show you how Carr Lane Manufacturing can be your one source for all your tooling component needs. 

If you plan to attend TECMA March 2-5, 2021, in Mexico, please add us to your list. Want to request an appointment to meet with us at the show? Please email us with your questions or interest and we'll contact you in advance to ensure we have the opportunity to talk in person. 

Products You'll See At TECMA 2021!

Hoist Rings
Carr Lane offers a large selection of hoist rings including swivel hoist rings that swivel 360 degrees that allow lifting from any direction as well as side-pull hoist rings ideal for side mounting, pivoting hoist rings, economical lifting eyes and a variety of hoist ring accessories including forged rings, round and square renewal road plates, clips & weld-in threaded inserts. Carr Lane lifting rings are available in multiple sizes with tremendous load capacity and boast an industry-leading safety factor of 5:1. Browse the full catalog of Carr Lane hoist rings below.
Carr Lock® System
The Carr Lock® System allows accurately locating and clamping at the same time, with just the turn of a hex wrench and is Ideal for mounting quick-change tooling on a subplate. With the Carr Lock® System, Each mounting point consists of three components: (1) a Carr Lock® Clamp, with a precisely ground shank; (2) a Carr Lock® Liner Bushing in the top plate; (3) and a Carr Lock® Receiver Bushing in the subplate. This compact assembly of the Carr Lock® System provides considerable hold down force, together with an incredible +/-.0005" repeatability. 
Toggle Clamps
Carr Lane offers an industry-leading line of heavy duty toggle clamps including horizontal-handle toggle clamps, vertical-handle toggle clamps, push/pull toggle clamps, toggle edge clamps, latch-action toggle clamps, toggle pliers, air-powered toggle clamps and a complete line of toggle clamp accessories. All Carr Lane clamping products are proudly made in the USA. 
Ball Lock Pins
Ball Lock Pins are high-strength, quick-release alignment pins with a precision ground shank. Ball Lock Pins are positive locking until released by pushing the button, which moves the center spindle forward to allow the locking balls to retract (double-acting version releases by pushing or pulling). Carr Lane offers a large assortment of Ball Lock Pins including heavy-duty Ball Lock Pins, adjustable Ball Lock Pins, lifting pins, marine pins, double acting Ball Lock Pins and ball lock receiver caps that are ideal for securing Ball Lock Pins used in clevis applications. 
Captive Jig Pins
New Item!

Similar to a standard Jig Pin, except that the pin body is positively retained in a locking bushing. In fully retracted position, the bushing's spring clip snaps into the pin's groove. This holds the pin fully retracted by spring force and positively prevents removal. Spring pressure also holds the pin in intermediate extended positions, an advantage especially if the fixture is turned upside down. Like standard jig pins, Captive Jig Pins have an integral shoulder to keep the handle raised. Available in pin diameters from 3/16 to 1/2". Made in USA.

The complete assemblies listed below include a Captive Jig Pin, Locking-Pin Bushing, and Lockscrew. Choice of standard or long bushing in most sizes, for installation in thinner or thicker plates. Locking-Pin Bushings are designed to press fit in a standard reamed hole, and can be further secured with the included Lockscrew to positively hold the bushing in place.
Captive Locating Screws with Hand Knob
New item!

These Captive Locating Screws have an integral hand knob for tightening by hand. Captive Locating Screws can be used for locating and clamping, or for clamping only, by selecting the appropriate screw length. The locating screw's precision-ground body is positively retained in a locking bushing. In fully retracted position, the bushing's spring clip snaps into the body's radial groove. This holds the screw fully retracted by spring force and positively prevents removal. Spring pressure also holds the screw in intermediate extended positions, an advantage especially if the fixture is turned upside down. Available in thread sizes from 1/4-20 to 1/2-13 (M6 to M12 in metric). Made in USA.

The complete assemblies include a Captive Locating Screw, Locking-Pin Bushing, and Lockscrew. Choice of standard or long bushing in most sizes, for installation in thinner or thicker plates. Locking-Pin Bushings are designed to press fit in a standard reamed hole, and can be further secured with the included Lockscrew to positively hold the bushing in place.
Cable Assemblies
Cable Assemblies are ideal for attaching removable alignment pins and other tooling components. High-strength stranded wire cable with a green nylon coating. These versatile attachment cables are available with various loops, Cable Rings, Terminals, and Cable Tabs. Most cable-assembly types are available in all four standard cable diameters, in steel and stainless steel.
Spring Locating Pins
Spring Locating Pins are press-fit inserts that provide an extremely compact way to apply side force to a workpiece, for positioning or light clamping. Carr Lane offers several Spring-Loaded Locating Pins made from various materials such as Steel, Stainless Steel and Delrin®. For custom pins, Carr Lane also offers a tapped receptacle, while eccentric liners can be used to provide additional workpiece adjustment and supplement all three types of Spring Locating Pins. All Carr Lane Spring Loaded Locating Pins are available in five different sizes, from ¼” to 5/8” in body diameter. Light, medium and heavy forces are available in most sizes. 
No-Rebound Hammers (Steel Handle)
No-Rebound Hammers deliver full impact, about 50% greater than a standard hammer. The housing is filled with special steel pellets that transfer momentum to the impact point. Ideal for assembling machine parts without damage. Speeds up work while reducing fatigue. Allows better hammer control by absorbing the bounce. Steel tube handle with ergonomic rubber grip. Made in Germany.

Available in four sizes (face diameters), in the following weights:

          30mm (1.18")     1.2 lbs
          40mm (1.57")     1.9 lbs
          50mm (1.96")     2.6 lbs
          60mm (2.36")     3.9 lbs
One-Touch Quick-Acting Swing Clamps
One-Touch Swing Clamps are manually operated clamps that first rotate exactly 70° clockwise into position then clamp straight down in one continuous motion. Available in the three types.