Quintus Vise Adaptor Plate
Due to its small size, the MC40 vise must first be mounted on a Quintus Vise Adaptor Plate (CL-130-01-QRFP), which is then mounted on the Quintus 1 riser. To locate the vise on the adaptor plate, use two Fixture Locating Pins, a round pin for zero-point centering and a diamond pin for single-axis centering. To fasten the vise, use six M6 x 30mm socket-head cap screws inserted through the plate from below. Next, install a Quintus 1 pull-down bolt in the adaptor plate's M10 bottom center hole. To locate the adaptor plate, the Quintus 1 riser utilizes its two integral locating pins, a round pin for zero-point centering and a diamond pin for single-axis centering, which fit into the two 10mm locating holes underneath the plate. Turning the Quintus mechanism exerts 2700 lbs of force on the pull-down bolt. See Related Products below for mounting accessories.